Canopy for twin bed – To make a netting of canopy for twin bed, first measure the distance around the hula hoop and add 2 inches. Cut a piece of satin fabric that number in length and 3 inches wide. Fold the short ends of the satin down 1/4 inch and sew these ends down at the crease. Fold the ends again another 1/4 inch, sew the first seam line. Fold in half lengthwise with the right sides together. Sew along the long raw edge with a 1/4 inch seam. Turn this tube right side out.
Cut the netting of netting canopy for twin bed with four equal-length pieces. Each piece will be about 8 meters in length. Sew all four pieces together side by side. Screw a chandelier hook in the ceiling above your bed. For an entire bed effect, place the hook over the middle of the bed. Cut hula hoop with a knife so that you have an opening in the circle. Push satin tube of hula hoop, light material around the circle to cover bail altogether.
12 Photos Gallery of: Canopy For Twin Bed
Cut four pieces of ribbon, each 3 meters long. Three bands through the hula hoop and tie each to a satin loop. Place each satin bow equally distant from the others, at 3, 6, 9 and 12 on the clock. Keep all four loops in hand and hang them on the chandelier hook. Gather the top of the entire piece of netting around the base of the chandelier hook. Wrap a piece of tape around this overall netting to keep it in a pile. The netting will fall over satin-covered hula hoop with an opening that can be placed either in the middle or on one side of the bed. Netting canopy for twin bed was done.