Decorative Recessed Light Covers – Recessed lights allow a modern look too many homes. Also with the recessed luminaries on the ceiling, you do not need to compromise the height to accommodate a light. However, there is a minor drawback for lighting. Since you have to cut the ceiling of drywall to install the luminaries, this provides a means to infiltrate your home’s cold air. To resolve this problem, install a cover over the top of the recessed luminaries.
This will seal penetration and save some money on your energy bill. Instructions: Move the insulation of its recessed light. It should have 8 to 12 inches of free space around the lamp to install the decorative recessed light covers. Center the recessed light cover on the lamp in the attic. Mark on the cover of any cuts necessary to fit around the beams or other obstructions. Cut along your marks. The cover material will determine what you use to cut. If the cover is a type of sheet insulation, use a utility knife.
12 Photos Gallery of: Correct Tips Install Decorative Recessed Light Covers
If the lid is metal, scissors will work just fine. Slide the decorative recessed light covers into position. Now it must fit around obstructions. Tape to the plaster ceiling with tape. If you did any cutting, stick it along these too to make it airtight. Move the insulation of your new attic into place around the deck. Strain it up and make sure it does not compact.