Outdoor bar height table and chairs – A home bar is one of the best places to entertain your guests. You may encounter problems, but if you are hosting a large group of people and your entire bar space is taken up. The solution to this is to build more tables that are the height of the crossbar. These tables make it easy for your guests to gather at the same time keep the party flowing. They are easy to build and can be done in about an hour.
Outdoor bar height table and chairs place one of the 2x4s against one of the 4×4 so that the 4-inch side of 2×4 is against a side of 4×4, and 2-inch page is also an edge of 4×4. Level the piece of wood and turn it into 4×4 with two screws. Attach a new page of 2×4 to a 4×4, so that the 4-inch side is against 4×4, and 2-inch page is even with the edge and perpendicular to the first 4×4. This board should fit in the “pocket” created between the first 2×4 and 4×4.
12 Photos Gallery of: Outdoor Bar Height Table and Chairs Design
Attach this board with four screws. Repeat the process of step 2 for the remaining two 2×4 boards, place them perpendicular to the first two 2x4s, and also with the edge of 4×4. This is the bottom support for the table. Place the 4×4 on the supports so that it stands straight up. Place the 30-inch square board 4×4 on top of the pole and center it. Screw this bit into the top of 4×4 with four screws.