Recessed lighting installation – Once you have determined the location of your recessed lighting, you will need to access the attic. This is easier if you have an attic or crawl space above the ceiling. Once inside the ceiling, to remove any insulation from the joists. You will then take the frame for your recessed lighting and place it between two ceiling joists. The frame will have a hole that houses the light container. Trace a circle in the hole and cut the opening in the ceiling with a small saw.
After cutting the hole, the screw frame of recessed lighting system in both sides of the roof beams. On the frame you just installed, you will see an electrical box. Connect the armored cable from the electrical box to the container. Driving parameter cable from the electrical box to the wall switch. For the finishing recessed lighting installation tips, Open the electric field of the frame recessed lighting. Inside the box you will find two black wires and two white wires.
25 Photos Gallery of: Recessed Lighting Installation Tips
Splice wires with a wire cutter. Using wire connectors, connect the black wire to the black wire and the white wire to the white wire. Open the electrical box and replace any insulation, keeping in view the free space for the kind of rack you have installed. Take lighting the container and place it in the hole. The screw in the illumination reflector and the ceiling trim to the vessel. Screw in the bulb and test your new recessed lighting installation.