Truck bed canopy – Using strips of foam tape along the lower edges of the sides and the front of the sail truck. Use a tape measure to measure the length of the sides and front of the sail truck. Cut foam tape measured with scissors. Place the adhesive side of the foam tape the rails of the canopy truck. This will protect the sides of the bed from scratches from your sails truck. Lift the canopy of the truck and put it on the track bed truck. Have someone help you lift the canopy truck. Adjust truck with truck bed canopy rails your truck.
Climb into the truck bed canopy. Use the J hook mounting clamps to attach the canopy truck to the width of the truck bed. Use your fingers to turn the bolt on the caliper mounting hook J counterclockwise to loosen the grip. Place the top half of the hook clamp J lip of the canopy truck. Wrap the other end of the J hook mounting clamp to the guide of the truck bed canopy. Turn the bolt on the J mounting hook clip clockwise to tighten and canopy truck safely to the truck. Place a clip hook assembly J in each of the four inner corners of the canopy truck.